Hi Rachael80,
Please use the following steps to download the software for your unit from Canon's web site:
1. Visit Canon's website at: http://www.usa.canon.com/cusa/support/consumer
2. Type PIXMA MG6220 in the "Enter Your Model Name" box and click GO.
3. On the Support page for your unit, click the 'Drivers & Software' link in the middle of the page.
4. Under Recommended Downloads, please click on the MG6200 series CUPS Printer Driver.
5. If you agree, please select the checkbox next to "I have read and agree to the terms of the Disclaimer and wish to continue with the download".
6. Click the Download button.
7. The file will be downloaded.
8. Once the download is complete, click the 'Drivers & Software' link again.
9. Under Recommended Downloads, please click on the MG6200 series Scanner Driver.
10. If you agree, please select the checkbox next to "I have read and agree to the terms of the Disclaimer and wish to continue with the download".
11. Click the Download button.
12. The file will be downloaded.
13. Once the download is complete, click the 'Drivers & Software' link again.
14. Click Software.
15. Click on the download icon next to the Canon IJ Network Tool.
16. If you agree, please select the checkbox next to "I have read and agree to the terms of the Disclaimer and wish to continue with the download".
17. Click the Download button.
18. The file will be downloaded.
19. Once the download is complete, close all windows.
To install the unit for use over your network wirelessly, please follow these steps:
1. On your PIXMA MG6220, press the HOME button.
2. Use the up or down button to select Setup and press the right FUNCTION button.
3. Use the left or right button to select Wireless LAN Setup and press OK.
4. Select Standard Setup and press OK.
5. Select your Access Point and press OK.
6. Enter your WEP or Passphrase. To enter this, please follow these steps:
6-1. When an on-screen keyboard shown above is displayed, press the center Function button to switch to a keyboard that supports characters you want to use. Three types of keyboard (upper case alphabetical, lower case alphabetical and numeric/symbolic) are available. Each press of the center Function button switches the keyboard type.
6-2. Use the buttons to select a character from the on-screen keyboard, then press the OK button to enter it. Entered characters appear in the upper section of the on-screen keyboard.
6-3. Repeat 1 and 2 to enter more characters.
7. After entering all characters, press the left Function button to select Done.
8. Verify the password is correct and press the left Function button.
9. On your computer, please double click [mcpd-mac-mg6200-11_7_1_0-ea17_2.dmg] to install the printer driver.
10. Double click [msd_-mac-mg6200-18_0_1b-ea11.dmg] to install the scanner driver.
11. Double click [mnt_-mac-4_5_0-ea19_2.dmg] to install the Network Tool.
Files will extract, follow the prompts to complete installation.
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
