11-28-2016 11:06 AM
Hello to AllProblem with the Manual/Auto Zoom in my 600EXII-RT flash. I cannot change the M mode to Auto.When I press the Zm/CFn button all the times I have WIDE PANEL and the mm are 14 even with my 24-70 lens.
Any ideas how I can reset/correct this problem?
Thank you
Solved! Go to Solution.
11-28-2016 11:12 AM
There is a little switch in the back of the wide-panel holder that must activate to tell the camera the wide panel is not being used. Pull the wide panel out completely, and re-insert it a few times to try to get it to seat properly.
11-28-2016 11:12 AM
There is a little switch in the back of the wide-panel holder that must activate to tell the camera the wide panel is not being used. Pull the wide panel out completely, and re-insert it a few times to try to get it to seat properly.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.