cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Camera Connect App User Guide

npsit
Contributor

Where is the User Guide for the Camera Connect App? Also, why doesn't his app transfer images with the location information?

 

That being said, I have successfully installed and used the app with my G7X. My informal User Guide for using this app is as follows. Any suggested "improvements" to this guide would be appreciated.

 

Getting Started and 1st Time Connecting

  1. Install the "Canon Camera Connect" app on your smartphone.
  2. On your camera in the "Change Camera Settings" Menu, select "Wi-Fi Settings"
  • Select "Reset Settings" to set the Wi-Fi settings to the default. (I suggest this just to make sure all settings are cleared).
  • Turn Password to "On" (if desired).
  • Select "Change Device Nickname" and enter a name for your camera, i.e., “My Camera”.
  • Exit Camera Settings menu.
  1. Close the Camera Connect app if it is still open on your smartphone.
  2. Press the "Mobile Device Connect" button on camera.
  3. Register a designation for one-touch connection by selecting smartphone symbol.
  4. On your smartphone, go to Wi-Fi settings and select the Canon Wi-Fi SSID hotspot from list.
  5. Using the password displayed on the camera, enter the password on your phone's Wi-Fi setting (if password is turned on in item 2 above).
  6. Be patient waiting for camera/phone to make a Wi-Fi connection.
  7. Once connected, launch Camera Connect app on your smartphone. Note:Things seem to work best if you launch the app after you have connected to the camera Wi-Fi.
  8. Select your device on the camera,i.e., "iPhone" in my case.
  9. If everything is connected properly, the smartphone app should show your camera's name at the bottom of the app screen (Success!). Note: if you press the ON/OFF button on your camera, the connection will be lost. Now you should now only work within the phone app.After you have completed the Getting Started steps above, in the future you only need to do the following steps to use Camera Connect.
Connecting to Camera
  1. Close Canon Camera Connect app if it is still open on your smartphone.
  2. Press "Mobile Device Connect" button on camera.
  3. Using your smartphone, go to Wi-Fi settings and select the Canon Wi-Fi SSID hotspot.
  4. Once connected, launch Camera Connect app on your smartphone. Note: It seems that things work best when you launch the app after you have connected to camera Wi-Fi.
  5. The camera/phone should automatically connect.Camera Connect has three button options, “Images on camera”, “Remote Shooting”, and “Location information”.Images on camera
  6. Use this selection to transfer images from the camera to your phone.
Using the Camera Connect App
  1. Connect the camera to your phone and launch Camera Connect app.
  2. Select “Images on camera” button on the app.
  3. Camera images will be displayed on the phone. Note: If you have added location information to photos, a small satellite symbol will be displayed in the top left corner of each photo that has gps data attached.
  4. Select a photo you wish to transfer and then hit phone symbol on the bottom of the screen to transfer image. Note: I haven't yet figured out how to transfer several images a once.
  5. When transferring photos via this option in Camera Connect, location information is not transferred (see comments below in "Location information" section.Remote Shooting
  6. Use this selection to remotely operate the camera with your phone.
Remote Shooting 
  1. Connect the camera to your phone and launch Camera Connect app.
  2. Select “Remote Shooting” button on the app.
  3. The camera lens will automatically come out and a live image will be displayed on the phone.
  4. You can zoom in/out and trigger the shutter via your Camera Connect app.
  5. When operating via Remote Shooting, the camera only works in “P” mode.
  6. Movie recording is not possible in Remote Shooting.Location information
  7. Use this selection to add the location information to images on the camera. The process involves first telling your phone to start logging locations, by date and time, and then later adding this location information to images with matching dates and time. For this feature to work, the camera needs to have the same date and time as your phone (Use camera Settings to change the date and time on your camera). There are two choices within the Location Information:
  • Begin (End) Logging: Select this button to start or stop you camera from logging location information. You need to start the logging prior to taking photos that you wish to tag with location information. Note that you do not need to have the camera connected for this step and the logging will continue even when the Camera Connect app is closed. Also note that phone logging will increase the battery usage on your phone. After you have taken your photos with your camera, select End Logging to stop phone logging.
  • Send Location Information: Connect the camera to your phone (Make sure you have already closed the app on your phone before starting the connect steps) and select this button to add location information to images taken on the camera while your phone was set to location logging. After you have done this, you can go to “Images on the Camera” button to review the images – Those with location information will have a small satellite symbol displayed on the top left of the screen. Note that all photos transferred with the “Images on the Camera” transfer function will not transfer the logging information. You need to transfer the images directly off the SD Card via an SD card camera reader cable to your phone or to your computer in order to transfer the images with location information. (Hopefully Canon will change this limitation some day)
 
114 REPLIES 114

npsit
Contributor

I am able to successfully connect to my iPad using Camera Connect but when I try connecting to my iPhone 6, it connects briefly and then drops the connection. I have the latest Camera Connect iOS app (V. 2.0.30.32) and am connecting to my Canon G7X camera. Any ideas on how to fix?


@npsit wrote:

I am able to successfully connect to my iPad using Camera Connect but when I try connecting to my iPhone 6, it connects briefly and then drops the connection. I have the latest Camera Connect iOS app (V. 2.0.30.32) and am connecting to my Canon G7X camera. Any ideas on how to fix?


I don't use the G7X, but Canon's more advanced DSLR camera bodies do not all switch between wireless connections very well. If you want to switch to a different wireless device, then you need to create an entirel new connection.  Not all camera bodies allow you to define multiple wireless connections, which means that you would have to first delete any existing connection, and then define a new connection.  .

--------------------------------------------------------
"The right mouse button is your friend."

My G7X camera does allow multiple devices setups but for some reason the iPhone setup drops after a few seconds and the iPad setup works fine. Both iOS devices have the same latest iOS version (10.3.1).

Thanks for that. Now I understand why Canon gives everybody a run around on the lack of connectivity.

Can you not publish this in mainstream media ?


@BernardWessels wrote:

Thanks for that. Now I understand why Canon gives everybody a run around on the lack of connectivity.

Can you not publish this in mainstream media ?


As long as we're being brutally honest, let's acknowledge that WiFi is not, nor ever was, a particularly good way to communicate with a camera.

Bob
Philadelphia, Pennsylvania USA

jreinke
Apprentice

Hi, I recently purchased an EOS 7D Mark ii with the added WiFi card.  I installed Camera Connect and have successfully paired the camera with my iphone 6, and am able to see the camera photos on my phone.  I am UNABLE, however to save any of the photos to my phone.  It just continuously spins on my phone, and the camera shows a Busy..... message.  Does anyone have a thought on how to fix?  Very frustrated...thank you.

rodsuemartinez
Apprentice

I have been able to get my 7D Mark II connected to my smartphone. Camera connect has been installed and everything is fine up to the point when I want to use remote shooting. The screen to use appears and all the camera settings are displayed but the screen is black and it keeps flashing busy the same with the camera-it says it is busy. I press the button to yake a picture and nothing happens. The scene I am trying to take a picture does not appear on the screen. It remains black and flashes busy. I can view images I have on my memory card but they are not images taken with remote shooting. What am I doing wrong. The camera is set to P and live view on the menu is enabled 

Abbylee55
Apprentice

Hi so i'am trying to connect my phone to my camera and I know the instructions, but when I go to my camera to click "connect mobile device" it won't let me click it. 

Hi Abbylee55,

 

Thanks for posting.

 

To allow us to better assist you, please let us know the following:

 

  1. Which Canon Camera do you have?
  2. Which System (Android or iOS) and which version does your phone use?
  3. Have you installed the Camera Connect app?
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Canon released a fix today, the issue was with the 1.1.1 firmware, downgrade to 1.1.0 and it will work.

Announcements