Canon Community Canon Community
 


Reply
Highlighted
New Contributor
Posts: 3
Registered: ‎02-11-2017
Accepted Solution

imagePROGRAF PRO-1000 XPS Driver won't allow me to choose Letter Paper size

[ Edited ]

I am attempting to profile my printer using the X-Rite ColorMunki Photo and my Canon imagePROGRAF PRO-1000.  The issue I am having is that when I am in the printer driver, choosing the paper type and size I receive an error stating 

 

"You cannot print with the following combination.

 

Media type: Pro Premium Matte

Page Size: Letter 8.5"x11" 22x28cm

Use the selector below to select a suitable setting and select Change to use the new combination. Click Back to Setup to select a different combination

 

[X] 4"x6" 10x15cm
[  ]  Change to L 89x127mm

 

Note: After making the change, check the layout with the application software.

 

To cancel the safety margin regulation click [Back to Setup], and then on the [Page Setup] tab of the printer driver, under [Print Options], check [Cancel the safety margin regulation for paper size]"

 

(See photo)

Canon iPF PRO-1000 XPS driver error

 

Canon obviously makes the Pro Premium Matte in 8.5"x11" Letter size, i just can't get it to select it.  any assistance would be greatly appreciated.

 

I am running on a Windows 8.1 desktop connected to the printer through via wired LAN and have installed all applicable updates and drivers for the operating system and all software on the computer.

 

Thanks in advance for the help!

 

Best regards,

 

 -Thomas 

Esteemed Contributor
Posts: 3,862
Registered: ‎11-13-2012

Re: imagePROGRAF PRO-1000 XPS Driver won't allow me to choose Letter Paper size

Premium matte is a Fine Arft paper so you need to choose "Letter (Fine Art Paper 30 Margin)"

John Hoffman
Conway, NH

1D X, Rebel T5i, Many lenses, Pixma PRO-100, MX472
New Contributor
Posts: 3
Registered: ‎02-11-2017

Re: imagePROGRAF PRO-1000 XPS Driver won't allow me to choose Letter Paper size

[ Edited ]

John,

 

Thanks for the tip, I will try that.  I just wish to inquire as to why I need to choose that choice when the driver has a listing under "Fine Art Papers" > "Photo Paper Pro Premium Matte"? (Also my options don't list

"Letter (Fine Art Paper 30 Margin.)"

 

Best regards,

 

 -Thomas

 

Screenshot 2017-02-11 04.50.19.jpg

Esteemed Contributor
Posts: 3,862
Registered: ‎11-13-2012

Re: imagePROGRAF PRO-1000 XPS Driver won't allow me to choose Letter Paper size

I am printing on a PRO-100, and here is message I get when I choose Letter size.

 

This is all I can offer:

 

Capture.JPG

John Hoffman
Conway, NH

1D X, Rebel T5i, Many lenses, Pixma PRO-100, MX472
Esteemed Contributor
Posts: 3,862
Registered: ‎11-13-2012

Re: imagePROGRAF PRO-1000 XPS Driver won't allow me to choose Letter Paper size

Try selecting cancel safety margin. 

John Hoffman
Conway, NH

1D X, Rebel T5i, Many lenses, Pixma PRO-100, MX472
New Contributor
Posts: 3
Registered: ‎02-11-2017

Re: imagePROGRAF PRO-1000 XPS Driver won't allow me to choose Letter Paper size

That fixed it.  (Also, I figured out how to get the Letter Margin 30. I had to switch from borderless to normal in page layout.)   Thanks for the assist!

powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement