Canon Community Canon Community
 


Reply
Occasional Contributor
Posts: 7
Registered: ‎10-26-2013

Removing print head Canon PIXMA PRO-100

[ Edited ]

I thought it lifted right out once you raised the grey arm there on the right side. That didn't happen, and I'm not about to risk breaking it.

 

The carriage snagged the side of a paper as it was printing. As a result, it looks like a bit of loose ink got on the head, as I've seen a couple sheets come out since then with random black marks at the bottom of a page. I remember an old Epson of mine doing the same thing.

 

I would like to clean it, just in case. How do I properly remove the print head?

 

Thanks.

 

By the way, I love this printer.

Product Expert
Posts: 2,411
Registered: ‎10-16-2012

Re: Removing print head Canon PIXMA PRO-100

Hello.

 

For information regarding this matter, please contact our support group.  Use the "Contact Us" link below for additional assistance.

This didn't answer your question or issue? Find more help at Contact Us.

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
VIP
Posts: 8,139
Registered: ‎12-07-2012

Re: Removing print head Canon PIXMA PRO-100

If you are uncertain about its removal and cleaning, you are better off getting professional help.  Call Canon Support as advised.  Smiley Happy

 

You can do great damage to the print head if not done correctly.

A lot of Canon stuff. Along with, a lot of other stuff.
Highlighted
New Contributor
Posts: 1
Registered: ‎08-18-2017

Re: Removing print head Canon PIXMA PRO-100

I'm a little late to the party for this thread, but I came across it looking for the answer to the same question. Sadly, the Canon Pro-100 series On-Screen Manual was of no help.

 

Canon is a fine company with excellent customer support, so it's a shame that Product Expert Michael couldn't have been more helpful in his response. The answer isn't rocket science. I'm sure Honored Contributor ebiggs 1 was wanting to help, but he essentially just echoed Michael's response, without offering any more helpful information to the orginal poster UNIVACCP642B.

 

Fortunately, there is a wealth of information and maintenance tips elsewhere on the web, such as this excellent post:


http://daydull.com/tips-tutorials/how-to-remove-a-canon-printhead-how-to-clean-a-clogged-printhead/

 

I hope the OP has long since received the support he needed to resolve his printing issues. I will echo HIS last comment, and say that I love this printer, too!

powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement