03-16-2017 02:10 PM
I have a Pixma Pro 9500 MkII that still prints great, but the latch that tells the printer the cover is closed has become faulty. Occasionally the printer will recognize that the cover is closed and everything works fine, but 95% of the time I'm stuck with a Support code 1200 message that reads "The printer's cover is open. Close the cover" (when the cover is closed obviously).
Sometimes the error message will flick on and off while the lid is closed, and sometimes the error message shows consistently. Either way I'm unable to get any printing accomplished. I was able to physically hold the latch down with the cover open to make the 1200 error message go away, but that method has stopped working and I now still have an error even when I physically hold the latch down.
Is there any possible way to just bypass the 1200 error message? Something I can turn off in the printer's properties? I really need some way to resolve this issue without buying an entirely new printer.
I've tried getting help from Canon with this problem before but I was told that this model of printer is no longer supported so they couldn't help me.
Thanks
03-16-2017 03:30 PM
Hello.
There may be a hardware issue that is causing this error. The drivers and software on your computer would not be causing this.
Please contact our support group using the "Contact Us" link below for additional assistance with this error.
This didn't answer your question or issue? Find more help at Contact Us.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.