10-15-2013 02:34 PM
I have a new mx 922 which is printing wirelessly from my MacBook Pro running 10.6.8. It has the setup ink cartridges in it and is loading paper from the bottom tray. The printing is coming out mostly crisp but with a fuzzy section left of center all the way down the page and has been doing this since I set it up last week. Do I need to send it back or is this something I can adjust?
Thanks in advance,
Phoebe
10-18-2013 03:58 PM
Hi bluetruck,
From what you describe, it sounds like you have a dirty or damaged encoder strip. First, let's check to see if the encoder is just dirty. Check out this article from our Knowledge Base: Cleaning the encoder (timing) strip - MX922.
If this didn't work, or if you have any other questions, please feel free to Contact Us!
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.