Canon Community Canon Community

New Contributor
Posts: 1
Registered: ‎03-09-2013

Turned on Pixma MG5320 for the first time and got error code 5011.


Right out of the box got error code 5011 when plugged in.  Step #6 after removing all the packaging.

Support says they are closed.  Only thing I could find on line was a guy at Amazon had same issue and had to return his new unit.


Anyone seen this before?




Product Expert
Posts: 2,686
Registered: ‎10-16-2012

Re: Turned on Pixma MG5320 for the first time and got error code 5011.

Hello windsaler.


Unfortunately, this error indicates that there is an internal hardware issue with the printer. 


Please try the following to see if we can resolve your issue:


1.  Turn the printer off.

2.  Unplug the power from the printer for at least 5-10 minutes.

3.  While unplugged, remove any paper from the unit.

4.  Double check for any obstructions found in the unit or paper paths.

5.  If no obstructions are found, plug the power back in and turn the unit on.


If the issue persists, please contact our support group using the "Contact Us" link below for additional assistance.


This didn't answer your question or issue? Find more help at Contact Us.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement