Canon Community Canon Community
 


Reply
New Contributor
Posts: 2
Registered: ‎01-03-2018

TS8120 Operation Panel will not close after printing

Hi,

 

I just bought TS8120 printer however uppon completion of printing nither the output tray retracts nor the operation panel closes. Please advize. 

 

Thank you,

T. 

New Contributor
Posts: 1
Registered: ‎01-09-2018

Re: TS8120 Operation Panel will not close after printing

 

There is an option that must be set for the tray to retract (I'm not certain whether it is enabled by default).  My tray retracts but the operation panel stay up, floating.  I haven't found any reference in the manual that it should automatically retract but since it automatically lifts up I would think so.  

 

Aside from that I am shocked at how poor the print reproduction is-- first Canon in a long time after a series of Epson printers.  Everything is coming out super washed out or just wrong.  I completed the auto-caliberate but no joy.  I mention all of this because it might not matter if the retract is a defect or a problem by design as mine will be on its way back.

 

Hope somebody answer's you (us).

Highlighted
New Contributor
Posts: 2
Registered: ‎01-03-2018

Re: TS8120 Operation Panel will not close after printing

Hi BuyersR3m0rs3,

 

You're the only one who responded and I appreciate that. I 100% agree, regarding the abysmal quality of Canon printers, this is my first and I am certain is last Canon printer. I used to had cheapo HP and even that was better functionally but never get HP Envy it's as bad as Canon. 

 

I could not find configuration that would retract tray and manual has no mention of this so called feature. 

 

Thanks agian for your response. 

powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement