12-10-2014 05:48 PM
A piece of paper was stucked in my Canon MG2150 and my computer told me to take this piece of paper out of the printer so I can continue my printings.
So i pulled it out (by force).
But since I did that, every printing is displaced (one line is good, the line under it is displaced towards left or right, and so on...
I tried to align the print heads automatically and manually thanks to the maintenance panel but there is nothing to do, it keeps printing displaced...
What can I do ?
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.