Canon Community Canon Community
 


Reply
New Contributor
Posts: 1
Registered: ‎06-12-2017

Re: Please make MP Navigator EX work with MX922

i, also, am very disappointed that MP Navigator EX 5.1 doesn't work with my new PIXMA MX922. My old MX890 had a 'fatal error' and died recently. RIP! I HATE all the cutsy stuff that has been added, i.e.,  "MY IMAGE GARDEN"--REALLY!!!!

Occasional Contributor
Posts: 6
Registered: ‎10-26-2017

Re: Please make MP Navigator EX work with MX922

[ Edited ]

I have also been a dedicated MP Navigator EX user for many years. After spending several hours in two separate phone calls to Canon support and finding out that the support staff was not able to help me, I figured it out on my own.

 

Please note, that I use Mac OS X, Version 10.10.5 (Yosemite)

 

I can now happily report that the Canon IJ San Utility, the replacement of MP Navigator, that works with my new MX 922 does in fact work very well and is indeed a great improvement. The trick is getting the correct IJ Scan Utility installed on your computer.

 

 

After installing the different drivers etc. from the included disc (after a special install software download) I got an error message every time that told me that ScanGear failed to install each time. I could not get around that. I searched online for a MP Navigator replacement and ended up with "Canon IJ Scan Utility2". I found it here: [Removed 3rd party link per Forum Guidelines]  Although it works fine for scanning do not get this, as it is the wrong utility. I'll explain below.

 

The interface looks like this:

 

Screen Shot 2017-10-26 at 1.10.56 PM.png 

Note the button on the right that says "Driver". Pressing that button opens the Apple Image Capture interface,

 

Screen Shot 2017-10-26 at 1.59.04 PM.png

but not a familiar MP Navigator like interface. However the user's manual "MX920ser_Scanning_EN.pdf", on page 82 clearly shows the ScanGear software interface. And on page 6 of that same manual the IJ Scan Utility also looks different. It does not have that "Driver" button. It has a "ScanGear" button. 

 

So I ended up at Canon's driver download page at http://tinyurl.com/h6pbbqt.

 

Here I downloaded the following 2 files: 

misd-mac-ijscanner5-4_0_0-ea19_2.dmg.  Under "Optional Driver(s)". This is the IJ Scanner5 driver 

 

and

 

msd_-mac-mx920-19_1_0a-ea11.dmg. MX920 series Scanner Driver Ver.19.1.0b (Mac). This is the ScanGear_MX920 series software. After installing that second package, this is what my Canon IJ Scan Utility interface looks like now.

 

Screen Shot 2017-10-26 at 1.34.28 PM.png

Notice the difference with the previous image. It is Scan Utility instead of Scan Utility2. And it has the ScanGear button on the right.

 

This is what I get now when I click on the ScanGear button. The very familiar MP Navigator like interface we all wanted back so much. Including Basic and Advanced Modes.

 

Screen Shot 2017-10-26 at 1.41.22 PM.png

And after scanning multiple pages like for multiple page .pdf files I again get this.

 

Screen Shot 2017-10-26 at 1.48.09 PM.png

So, obviously the MP Navigator replacement for the MX922 printer does in fact exist, and is also better. There are a few things to learn still, like stitching which I would previously do in Photoshop after scanning. That was always a pain. We'll see how it works with the new Scan Utility.

This is of course good news for Mac users. Obviously I don't know if the same is true for Windows users.

I hope this helps all the frustrated former MP Navigator EX users who have Macs, and possibly also Windows users.

Good luck.

New Contributor
Posts: 2
Registered: ‎12-15-2017

Re: Please make MP Navigator EX work with MX922

When I'm in scan gear the images of the scanned document (last photo in your post) are in a tiny box I can barely see. And I can't click on the tiny image to see in full size and I can't click a box to select ot deselect to either skip pages or put in different order for save. Is the above last photo a pop up box that opens up after the image is scanned (I think it's called preveiw mode) or are those images within the box that is Scan Gear the way Navigator worked? Can you click on the image to see it in larger format? Can you select or deselect images? Hopefully this question makes sense. And thank you for your thoughtful post.
Occasional Contributor
Posts: 8
Registered: ‎12-08-2017

Re: Please make MP Navigator EX work with MX922

Me too. Will never buy another Canon anything. MP navigator worked well until I upgraded to high sierra and now all older canon printers can't scan anymore. Shame on canon. I have a Mx870
New Contributor
Posts: 2
Registered: ‎01-12-2018

Solution MP Navigator EX works with MX922 under name Canon IJ Scan Utility

I can scan with the PC interface and the control panel on the printer.  I had to enter my SSID and password manually as doing it with WPS did not work for my ATT router.

 

I was able to download necessary files for Macbook Pro 17" 2007 OS X El Capitan v 10.11 and Macbook Pro 15' 2017 OS X Sierra v 10.12.6.  Received same error as seen here "Cannot communicate with printer" error.

 

I received a DVD with printer software with the printer but it did not contain what I needed just a link that opened a web page when I chose my OS for each Macbook.  I bought an external optical drive for optical drive software since the 15" has no optical drive.  You don't need the DVD, you can go to the below site.

 

I went to Canon's site using link from the DVD https://www.usa.canon.com/internet/portal/us/home/support/details/printers/inkjet-multifunction/mx-s...

 

I think Register Product here is required.  Despite my registering it elsewhere this particular location seemed to make everything work wrt getting the right files and having them install without issue.

 

The site detected MACOS Sierra v10.12 (it also auto-detected correctly with my El Capitan Macbook Pro)

Click on Drivers & Downloads

Click Select on the three listed drivers

 

Select MX920 CUPS Printer Driver Ver 16.20.0.0

Download mcpd-mac-mx920-16_20_0_0-ea21_3.dmg 

 

Select MX920 Scanner Driver Ver.19.1.0b

Download msd_-mac-mx920-19_1_0a-ea11.dmg

 

Select Optional ICA Driver Ver.4.0.0.a-ea11.dm

Download misd-mac-ijscanner5-4_0_0-ea19_2.dmg

 

Double click on each file and install them according to instruction

Go to System Preferences - Printers & Scanners

Click the + and add Canon MX920 series  Bonjour Multifunction

Check Share this printer on the network 

Turn Printer Sharing on

Click Sharing Preferences add Users if needed

 

Your installation should have placed files you need in the Canon Utilities folder

In IJ Scan Utility folder double click Canon IJ Scan Utility this is the new MP Navigator Ex from what I can tell.

 

The Canon IJ Scan Utility interface will open 

Click to choose Product Name and change to Canon MX920 series Network (this got rid of the error unable to communicate) . If I left it as the default (Canon MX920 series I get the cannot communicate error)

You can now set your scanning preferences by double clicking Auto etc

Click OK on the message Scan by automatically selecting the settings......

 

The on-screen manual is less useful for settings info than the online manual.

 

powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement