04-09-2018 04:37 PM
Since updating the firmware 4 days ago, I've noticed that the time from requesting a print, to actual printing is taking about 5 minutes. There is a significant delay for the box indicating ink level (BTW ink levels are not provided) appears. When it does, there is a message along the lines of "...port is busy". It then disappears, but nothing is apparently happening. After several seconds, the printer display has words indicating to wait, after another several seconds, the document finally prints.
This printer is not the fastest in the first place, although quite tolerable. Now it is no longer tolerable.
04-18-2018 12:55 PM
Hi EdHunter.
It is recommended that you contact one of Canon's Technical Support Representatives. To contact a Technical Support Representative, please use the link below:
http://Canon.us/ContactLI
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.