07-05-2017 11:45 AM
I've seen an old message with this same problem, but tried the solution (to print a test page--but it wouldn't even light up the alarm light) no result for me.
When I plug in the printer, only the 4 x 6 photo paper light is on, and if I press the 'on' button, it will light, but the printer does nothing.
The ink cartridges are stuck all the way to the right and can't be removed.
I have tried reinstalling the current drivers from the Canon website.
I've tried setting it back up wirelessly, didn't work, then with the USB--and nothing.
I've removed plugs, waited, plugged back in and even changing electrical outlets in the house.
Nothing I've tried has helped, it is just like it is frozen. So if there's anyone out there with a suggestion, I'd appreciate it.
Windows 10 if it matters.
Thanks.
11-06-2017 12:34 AM
Hi lmaniac58,
Since the troubleshooting steps performed have not resolved the issue, the printer may require servicing; we ask that you please contact a Canon technical support representative here for further assistance. A representative will be happy to assist you free of charge.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.