Canon Community Canon Community
 


Reply
New Contributor
Posts: 2
Registered: ‎11-09-2017

Re: MP Navigator and High Sierra

I spoke to Technical Support this morning.  There is no update for MP Navigator for High Sierra, and it is highly unlikely there will be one.  If you are running a Mac in High Sierra, your only choice for scanning from your desktop is to go into System Preferences, click on Printers & Scanners, select your printer, click on Scan (above text on the right), click on Open Scanner, and scan from there. Otherwise you can scan from the printer to a USB fob, transfer the fob to your computer, and then open the scanned document on your computer.

Highlighted
New Contributor
Posts: 2
Registered: ‎11-12-2017

Re: MP Navigator and High Sierra

Thanks, Mark.  In the elegance stakes, that solution scores zero, I'm afraid!  Fortunately, by updating MP Navigator to v4.0.5 and reinstalling the IJ Network Tool in its latest version, all problems with my MG 6150 have been overcome.  Took me a couple of hours to sort that out and I would have hoped for an auto-update from Canon, to be honest, but the job's done, thankfully.  Hopefully this might help other sufferers.

Occasional Contributor
Posts: 8
Registered: ‎11-15-2017

Re: MP Navigator and High Sierra


Mark88 wrote:

I spoke to Technical Support this morning.  There is no update for MP Navigator for High Sierra, and it is highly unlikely there will be one.  If you are running a Mac in High Sierra, your only choice for scanning from your desktop is to go into System Preferences, click on Printers & Scanners, select your printer, click on Scan (above text on the right), click on Open Scanner, and scan from there. Otherwise you can scan from the printer to a USB fob, transfer the fob to your computer, and then open the scanned document on your computer.


I too have the issue with not being able to scan on my PIXMA MX870 after the High Sierra update.  I attempted to scan using the directoins you listed in your post but I am still unable to scan.  Very frustrating.

Occasional Contributor
Posts: 8
Registered: ‎11-15-2017

Re: MP Navigator and High Sierra

Well, this is great.  Here's the response to my post concerning my issue, "At this time Canon has not released Mac OSX 10.13 drivers for the PIXMA MX870.  All updated Drivers will be posted to Canon website at www.usa.canon.com as soon as they become available. Currently, we do not have any information as to when or if these drivers will be available. 

 

10.13 uses Airprint, any unit that is Airprint compatible can print as long as you are connected wireless  Note: Airprint does not support scanning.

If you continue to have difficulties or need further assistance, please contact our support group using the following link:

http://Canon.us/ContactLI"

 

I'm particulaly fond of the "when or if" comment in regards to a driver solution.  Sounds like my only option for resolution is to buy a new unit.  Even more frustrating.

New Contributor
Posts: 3
Registered: ‎11-16-2017

Re: MP Navigator and High Sierra

Come on Canon - get this sorted pdq. Looks like a world-wide problem. Causing real problems and holding up work/activity!!

New Contributor
Posts: 4
Registered: ‎11-16-2017

Re: MP Navigator and High Sierra

Same problem here with a Pixma MX 882.  I've been with Canon technical support twice.  They aren't going to update these drivers.  So basically a perfectly funcitonal printer/scanner is now useless for scanning.  The only solution is to use IOS Image Capture, which takes forever to scan.    Unbelieveable that Canon won't support a 5 year old printer.  This is the last time I buy a Canon product.

New Contributor
Posts: 3
Registered: ‎11-16-2017

Re: MP Navigator and High Sierra

If so, ditto me! MP Navigator great scanning slides and such from the Pima - now useless!

New Contributor
Posts: 3
Registered: ‎11-18-2017

Re: MP Navigator and High Sierra

Ditto me on MX870. If Canon does not want to provide an updated driver, how about gift card to use in buying a new multi-printer?

New Contributor
Posts: 1
Registered: ‎11-19-2017

Re: MP Navigator and High Sierra

I had the same issue with Pixma MG8150 after upgrade to High Sierra. Just installed MP Navigator EX ver. 4.0.5 and it's resolved. Unexpectedly I have found it at Asia Support Wesite. Why  Canon is not popsting this software on all Canon support sites? I'm from Spain...

 

http://support-hk.canon-asia.com/contents/HK/EN/0200328115.html

 

Good luck

 

New Contributor
Posts: 1
Registered: ‎11-19-2017

Re: MP Navigator and High Sierra

[ Edited ]

MP640R

powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement