12-18-2017 02:41 PM
There was paper jam happened at first. After I got the paper out, it's not going to the feed the paper properly. And then I tried to clean the roller following this: https://support.usa.canon.com/kb/index?page=content&id=ART142302.
I have done until this: Hold down the Stop button until the Alarm lamp flashes orange seven times, then release it immediately. The machine starts cleaning. The cleaning will be complete when the paper is ejected.
It happend that only 1/10 of the paper is fed in and stopped very soon so the paper is not ejected. Now I can't print anything with my printer. It's only 2-3 months old. Can some experts here please help me? Thank you very much!
03-12-2018 07:14 AM
jasminelsy,
It is recommended that you contact one of Canon's Technical Support Representatives. To contact a Technical Support Representative, please use the link below:
http://Canon.us/ContactLI
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.