11-05-2016 07:18 PM
11-08-2016 01:39 AM
In addition to removing and reseating the ink tanks, please also remove the print head from the printer and then reseat both the print head and ink tanks in the unit by following the steps located here to see if this will resolve the error. If the error continues, we ask that you please contact a Canon technical support representative for further assistance by entering your product name and selecting a support method here. A representative will be happy to assist you free of charge.
07-22-2017 11:31 AM
I just bought a new printer. When I replaced Cyan, I received support code 1750. So I followed the instructions and the cyan cartridge did not light up.
I think that going though the print head routine is a bit unreasonable considering this is a brand new printer.
08-01-2017 10:41 AM
I tried everything and cant get my conon to recognize the print cartridge. I have a MG5720 and just replaced the heads for the first time and keep getting the 1750 error. Please help
11-22-2017 10:12 AM
Troubleshooting with our support group will be needed to narrow down the cause of your issue. Please contact our support group using the "Contact Us" link below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
04-03-2018 03:57 PM
I had the same 1750 error as others when I put in new ink cartridges. Your response was to remove the printhead and reset it. However, there is no lever on my computer MG7720 to remove the printhead. Everything online speaks of a lifting a grey lever to the right of the cartridges. I have no lever grey or any other color. What can I do? Thank you.
04-14-2018 01:34 PM - edited 04-14-2018 01:37 PM
That just happened to me today only the tank has been in the printer for awhile and has about 1/3 of it's ink left (c271XL Magenta). It is also a Canon ink tank and not a knockoff. I took it out and put it back in but that didn't work. I replaced it with a new magenta tank and it is now working. As printer ink is one of the most valuable liquids on the planet earth it ticks me off that 1/3 of this tank is now trash. My error code was 1660 though.