10-10-2017 01:14 PM
Windows 10, wifi connection.
The printer worked fine for a long time. Now the "print" command makes the printer come to life, then it pauses, then it prints part of a page, pauses, and ejects the sheet. Today it doesn't print anything at all; it just ejects one or two blank sheets.
I restarted both it and the computer. That didn't help.
Any suggestions?
12-21-2017 11:03 AM
Hello.
Try turning the printer off and back on to see if this helps. If the issue persists, troubleshooting with our support group will be needed to narrow down the cause of your issue. Please contact our support group using the "Contact Us" link below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.