Canon Community Canon Community

New Contributor
Posts: 1
Registered: ‎06-09-2014

pixma 495

 paper feeds in about 2 inches then skews slightly to the right the printer sounds like it is printing 

but paper is not moving ..nothing stuck in printer  can any one help  pixma 495 

seem like the bottom of the paper right slightly gets kinked..see nothing  thanks in advance

Occasional Contributor
Posts: 5
Registered: ‎06-03-2018

Re: pixma 495

My Canon Pixma MP495 was working well until the ink began to run out and the print got dim. I installed new print cartridges, black C-210XL 211XL Color. Now when I try to print I just get indecipherable error messages. Pressing the start black button, which normally would do a copy, now just gives alternating "E", "1", backwards "E" and the amber "color ink" light is winking. Do you have any idea what might be wrong?

Occasional Contributor
Posts: 5
Registered: ‎06-03-2018

Re: pixma 495

I got an email saying: "

Hi ralatcanon,


shadow1 (New Contributor) posted a new reply in Printer/Multifunction Support on 06-04-2018 07:54 PM".


So where is it?

Super Contributor
Posts: 239
Registered: ‎02-13-2016

Re: pixma 495

You could try sending shadow1 a private message to see if he had any helpful information for you.


And you'll likely get a better response by starting a new thread instead of adding your new request to an old post from 2014.

powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement