05-08-2015 08:36 PM
ix6500 support code 1401: Print head not installed or installed incorrectly. What do I do? This printed fine yesterday.
06-17-2015 03:33 AM
Hi jleeald,
To try and resolve the error, please remove and reseat all of the ink tanks and print head in the unit, then turn off the printer, unplug the power cord and leave it out for at least 10 minutes, then plug it back in and turn it back on. If the error persists, the printer will require servicing; please call or email us using one of the methods on the Contact Us page for further assistance.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.