Canon Community Canon Community
 


Reply
New Contributor
Posts: 2
Registered: ‎11-28-2013

install new print head on iP7220 - can't get old one out

iP 7220 prints come out with vertical banding  -  I found a 7220 print head on eBAY but can't get the old print head out.  I have watched you tube videos but my head doesn't release when I pull the lower color description band outwards.  I'm afraid pulling too hard will crack the plastic holding it in.  Right side seems to disengage but the left side of the "holder" doesn't move.  

Am I doing this correctly?   what are all the things I should know about reinstalling the iP7220 print head.

THANKS

Product Expert
Posts: 1,720
Registered: ‎07-28-2014

Re: install new print head on iP7220 - can't get old one out

Hi NYCArthur,

 

Please follow the steps outlined in the following Knowledgebase Article to remove the printhead from your PIXMA iP7220:

 

https://support.usa.canon.com/kb/index?page=content&id=ART142045

 

If you continue to have difficulties, please contact our support group using the following link:

http://Canon.us/ContactLI

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement