08-20-2013 03:02 PM
PIXMA iX6520 just out of the box. Followed instructions but get a flashing orange light and message of paper jam. This printer has never had the first piece of paper run through.. Is there some packing tape or something to remove? The print holder never moved to the middle on it's own.
Am I doing something wrong or is this printer bum out of the box?
Thanks
Oly
08-23-2013 11:55 AM
So, am I to think that this has never happened to any other people.
08-29-2013 11:46 PM
Hi pixmacantprint,
There are a few areas there could be some orange protective packaging tape that is causing this error. Please check the link below for step-by-step directions:
If the issue persists, please let us know how many times the orange light flashes before it pauses. Thanks!
08-30-2013 12:23 AM
Thanks for the reply. Too late though. I just bought another on just like it. This one I got the two year warranty though.
The print head holder never moved to the middle and the lights on the ink cartridges never came on. I put the ink in the newer printer and it works fine. I will keep the non working printer around a while but don't have time to waste trouble shooting it at the moment.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.