06-19-2015 10:51 AM
Hi,
I've had this printer for a few years and today when I press the power switch the printer does not power up.
If I remove the power cord and wait a few minutes, plug it in again and press the power switch, the switch comes on for half a second and comes off.
Do you have an idea about the problem? What can I do? Thank you!
Cheers
06-26-2015 03:16 AM
You can check out printing shop or priting repering man hope yur problem solve it. other wise you see videos on u tube.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.