08-15-2014 05:06 PM
Why does my Pixma 922 make a scratchy sound when printing? It just started today, and I have cleaned the rollers, the bottom tray (which is the only tray I use), I have aligned the printer heads, and unclogged the cartridges. I have troubleshooted the printer and it states all is okay? Nothing is wrong with the printing images and no half printed testing pages.
Assistance please and any ideas will be marvelous!
08-25-2014 03:33 PM
Hi 4Adonai,
There is a setting the in the printer driver that may resolve this issue, "Prevent Paper Abrasion". To enable this, please follow these steps:
1. Click on Start and then Control Panel.
2. Click on Printers.
3. Right click the PIXMA MX922 and left click on Printing Preferences.
4. Click on the Maintenance tab.
5. Click on the Custom Settings button.
6. Place a checkmark next to Prevent Paper Abrasion.
7. Click OK.
8. Click Apply (if available) and then OK.
Attempt to print. The noise should be gone when printing.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.