08-19-2017 04:12 AM
Hello, just found this community and hope you can help.
I have a canon ix4000 that I intend to use for printing scanned 35 mm neg film onto canon paper, but the problem that I'm having is to 'fit' the print onto the paper without 'excessive' borders. For example if I designate a 6" x 4" paper, the print comes out in the preview with a border of more than an inch all round and it's the same with any other size.
I can 'fool' the printer by juggling around with the size I opt for, but it's not an ideal situation.
I use Windows 10 PC with Ability Office Photopaint and just currently downloaded Canon easy photoprint, that I can print from without problems to full page with no borders. If I designate borders, I do get a border, but one border is wider than the other!
Thanks in anticipation
Derek
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.