Canon Community Canon Community

New Contributor
Posts: 1
Registered: ‎03-10-2017

Canon Pixma ip110 won't properly print 4x6 paper

Wanted this printer to make 4x6s fine art prints on site at a wedding. Print issues abound! Prints are off-center when using 4x6 paper, smudged at the corners, too light when switching to borderless, borderless also ****shifts course in the printer*** so the last bit of the image is not aligned. See image.


Paper is Hahnemuhle Fine Art Photo Rag. IMG_4904 copy.jpg

Product Expert
Posts: 2,497
Registered: ‎10-16-2012

Re: Canon Pixma ip110 won't properly print 4x6 paper



The iP110 does not support Fine Art media.  Fine Art paper should only be used with our higher end products such as our imagePROGRAF or PIXMA PRO-Series printers.


Try using standard glossy or matte photo paper to narrow down the cause of your issue.


If the issue occurs with other types of paper, troubleshooting with our support group will be needed to narrow down the cause of your issue. Please contact our support group using the "Contact Us" link below for additional assistance.

This didn't answer your question or issue? Find more help at Contact Us

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement