03-19-2014 02:22 PM
Hello
I'm hoping someone here can help. I bought a newer laptop a few months ago which has Windows 8 on it. Ever since then, my scanner option hasnt worked. I can copy and print just fine. I dont use the fax option but do want to be able to use my scanning option
when I push the button for the scanner it says "please wait a while" and then nothing. Or it may say Scanner (local USB). I've unplugged it completely, both the power cord and the USB cord and replugged them in. and it still doesnt work
it doesnt look like I have any CD for it either if I had to reinstall software.
What can be done so the scanner works?
thanks, Suzanne
03-19-2014 05:05 PM
03-21-2014 01:33 PM
Hello,
Please download the My Image Garden software from the following link:
If there is any difficulty in the procedure, please reach us at http://bit.ly/Phone_Support and we can go through this with you step-by-step.
Hope this helps!
09-03-2017 03:22 PM
Why in gods name would i buy a piece of hardware from a hardware company that has a hardware button with the words "scan" on it and then use some janky software some monkeys over at Canon whipped together in 20 minutes.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.