12-09-2016 03:12 AM
HI,Newbie here,i have a canon imageclass mf4450 that will not print in large type you almost have to use a electron microscope to
see the print is there way to increase print size and keep it on the page,thank,s
02-04-2017 04:24 PM
Hi whoson1st.
I will be able to assist you.
If the issue is not resolved by increasing the font of the document, there may be a communication error between the printer and the computer. Please disconnect the printer from the computer, and then plug it into another open port on the computer.
If the error persists, please call us at 1-800-OK-CANON (1-800-652-2666) for further assistance.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.