FAQ
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MX 715 is printing page 3 and 4 of 4 wrong way up on duplex auto. Manual is OK

Jim_Piggott
Apprentice

‎02-21-2013 02:03 AM

 
0 Likes
1 REPLY 1

Devin
Enthusiast

‎02-26-2013 07:43 PM

Hey Jim_Piggot,

 

It looks like you're writing about the MX715, which is a product released by Canon Australia.  We recommend visiting the Canon Australia website for further assistance with this.  They can be reached by visiting http://www.canon.com.au.

0 Likes
Announcements
05/01/2024: Service Notice-EOS Webcam Utility Pro for macOS:V2.1.18

04/16/2024: New firmware updates are available.

RF100-300mm F2.8 L IS USM - Version 1.0.6

RF400mm F2.8 L IS USM - Version 1.0.6

RF600mm F4 L IS USM - Version 1.0.6

RF800mm F5.6 L IS USM - Version 1.0.4

RF1200mm F8 L IS USM - Version 1.0.4


03/27/2024: RF LENS WORLD Launched!

03/26/2024: New firmware updates are available.

EOS R3 - Version 1.7.1

EOS R5 - Version 2.0.0

EOS R6 - Version 1.8.4

EOS 1DX Mark III - Version 1.9.0

WFT-R10 - Version 1.3.1


03/22/2024: Canon Learning Center | Photographing the Total Solar Eclipse
02/29/2024: New software version 2.1 available for EOS WEBCAM UTILITY PRO
02/01/2024: New firmware version 1.1.0.1 is available for EOS C500 Mark II

12/05/2023: New firmware updates are available.

EOS R6 Mark II - Version 1.3.0

EOS R7 - Version 1.4.0

EOS R8 - Version 1.2.0

EOS R10 - Version 1.4.0

Selphy QX10 - Version 1.1.0.0


11/13/2023: Community Enhancements Announced
09/26/2023: New firmware version 1.4.0 is available for CN-E45-135mm T 2.4 L F
08/18/2023: Canon EOS R5 C training series is released.

07/31/2023: New firmware updates are available.

CR-N700 - Version 1.2.0

CR-N500 - Version 1.3.0

CR-N300 - Version 1.3.0

CR-X300 - Version 1.1.0


06/30/2023: New firmware version 1.0.5.1 is available for EOS-R5 C
Copyright © 2024 Khoros, LLC