08-09-2017 01:51 PM
Hi
Im looking for the quickest possible way to ebale spot metering on the 5D4. Is there a way, please, to assign it to a custom button?
Thanks very much
Julian
08-09-2017 04:13 PM
Hi there, Eagleburger!
Welcome to the Canon Community Forums!
To change the Metering Mode on an EOS 5D Mark IV, you'll just want to follow the procedure outlined HERE.
If you need one-on-one assistance, just reach out to our free, US-based technical support team at 1-800-OK-CANON (1-800-652-2666) from 8am to Midnight Eastern Time, Monday through Friday, or 10am to 8pm Eastern on Saturday.
08-10-2017 02:34 AM
Thanks for this. I'm really looking for something quicker than the satandard way - which I suspect isn't available. The equivalent would be assgining a custom button to change focus mode temorarily to Servo - which you can do.
Thanks
08-10-2017 03:33 AM
@Eagleburger wrote:Thanks for this. I'm really looking for something quicker than the satandard way - which I suspect isn't available. The equivalent would be assgining a custom button to change focus mode temorarily to Servo - which you can do.
Thanks
Save the camera configuration that you want to use as a custom "C" shooting mode.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.