04-27-2015 03:53 PM
Hi all,
I've registered to this community hoping that someone could help me around the continuous shooting on my Canon EOS 650D.
The camera can only process 3 to 4 shots at 5 fps (as it should be), but right after that the burst rate slows down significantly.
This occurs only when i'm shooting in RAW format, shooting in JPEG is ok, but that is not my point. I have also tried to disable the lens aberration correction in the menu, by disabling the peripheral illumination and the chromatic aberration. Still nothing.
I use an SDHC Class 10 card, with a writing speed of 30MB/s.
Is this normal? Can someone please help me?
Thank you in advace for your help.
Regards,
Ernest.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.