05-06-2013 02:59 AM
Hi all
I would like to know your opinion about the following issue:
In the viewfinder you see the set ISO value. This value can be altered without having to take the camera off the eye when your individual settings are accordingly: Press SET button and turn the main dial.
This is a very valuable setting as it makes it easy to have control over the ISO settings as well as over the Aperture and Time.
Now unfortunately it is not possible to turn the ISO value back to "Automatic". For this you have to take the Camera off the eye and go into the menu to change that value. This should be changed.
What is your opinion about this?
Regards, Alex
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.