07-16-2015 06:35 PM
Will an L-bracket made for a 5D Mk III fit a 5Ds correctly? The specs on the Canon site show the same dimension for both, however, I assume the depth is measured from the back surface of the body to the front surface of the lens mount. That does not mean that the distance from back to front across the bottom plate is the same on both hence my question. Thanks.
Solved! Go to Solution.
07-16-2015 08:50 PM
See this. It's about your question complete with a photo.
http://www.fredmiranda.com/forum/topic/1370974
07-16-2015 08:50 PM
See this. It's about your question complete with a photo.
http://www.fredmiranda.com/forum/topic/1370974
07-16-2015 09:14 PM
07-16-2015 09:17 PM
Your welcome.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.