06-08-2013 02:59 PM
I have used this card several times. I have copied the files to my computer succesfully. when I put the card back in the camera to format it, and turn the camera on, it says "No card in Camera" All my other cards work just fine. I can still read the card with my card reader.
How can I repair this card? Because the camera does not recognize there is a car in the slot, I cannot reformat the card in the camera.
Solved! Go to Solution.
06-08-2013 08:00 PM
Have you tried formatting it with your computer & card reader? If that doesn't work I'd recommend replacing it before you have important images on it & can't retrieve them. Cards aren't that expensive these days.
06-08-2013 09:16 PM
Scrap the card or it will bite you later.
06-08-2013 08:00 PM
Have you tried formatting it with your computer & card reader? If that doesn't work I'd recommend replacing it before you have important images on it & can't retrieve them. Cards aren't that expensive these days.
06-08-2013 09:11 PM
Thanks for the tip. I tried that too with no results.
I then tried recovering the files with Recuva. That worked but it still did not correct the problem.
06-08-2013 09:16 PM
Scrap the card or it will bite you later.
06-08-2013 09:23 PM
I think you are correct. I got it primarily for using with continuous shooting (burst mode) but I dpon't do itr that often.
06-16-2013 09:22 PM
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.