06-03-2021 11:16 AM
Hi
I have a canon pixma ts8150,when i turn it on the lcd screen is dead,nothing at all,does anyone know what could the problem be please
06-03-2021 04:19 PM
Do you hear any sounds when you turn it on? Wondering if its getting any power at all.
Anyhow, according the manual found at Canon Europe (note, this forum is for help with Canon's US-based products), it has no info about a blank LCD screen.
It only offers these steps if power does not come on:
[Check1] Press ON button.
[Check 2] Make sure power plug is securely connected to printer, and then turn it back on.
[Check 3] Unplug printer, leave it for at least 2 minutes, and then plug it back in and turn in on again.
If this does not solve the problem, contact your nearest Canon service center to request a repair.
06-03-2021 04:33 PM
Hi no sounds just the power light and nothing else
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.