04-03-2017 10:28 AM
Hi
My Canon Pixma MP560 is printing in a way I have never seen before. It has fine white horizontal banding lines. When a nozzle test is done, all colours show this, interspersed with centimeter-sized blocks of solid colour. I have cleaned, deep cleaned, and also done a print head alignment on both plain and photo paper. Nothing changes it. It doesn't look like a standard nozzle block. The only colour that is not affected is the pigmented black.
Any ideas?
Thanks
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.