05-26-2014 07:36 PM
Hi all,
I have an Oce CS 231 that had secure print setup by someone else however it is no longer working and I'm not sure what else I need to do or if I'm missing anything. I've read through the various manuals for this device and they don't help. Here are the steps I've followed to print off a secure document:
In Word I've gone to Print -> Properties -> Basic tab -> Output Method -> Selected Secure Print -> User Settings button -> Input an ID and password in their respective fields -> Ok 3 times to close the remaining boxes to send the job and I get a message on Windows that says the document printed.
I've then gone over to the printer selected User Box -> Use Document -> System User Box -> Input the ID -> Password and I constantly get an "Authentication Failed' message. I've checked for things like spelling mistakes and it occurs even if I keep the job ID as the number 1 and the password as the number 1. Not sure what else to do. If you need anymore information please let me know.
Regards
Kevin
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.