05-23-2013 03:33 PM
Finally figured out how to print from my iPhone, but if the printer is left on for any length of time, it seems to go into a "sleep" mode, the LCD goes blank. If something is sent to the printer during this time, nothing prints, even if I wake it up by touching one of the buttons (not the on/off button). Turning the printer off and then back on sometimes will result in the document being printed. Is there a setting to correct this?
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.