02-19-2022 10:02 PM
I accidently set the printer to the wrong language when setting it up.
How can I get it back to English.
Any help would be appreciated.
Thank you
03-02-2022 10:48 AM
Hi DAVE46,
Please follow these steps:
1. Press the Setup button ()
2. Press the right arrow one time and press OK.
3. Press the right arrow 4 times and press OK.
4. Repeatedly press the left arrow until you are not able to change the selection, then press the right arrow one time.
5. Press the OK button.
The display will now appear in English.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.