Canon Community Canon Community
 


Reply
New Contributor
Posts: 1
Registered: ‎06-11-2017

XC10: Charging via a 9v or 12v mobile battery pack

Basically my question is this:  Has anyone been able to successfully charge a LP-E6N inside a XC10 from a mobile battery pack? If so, was the battery pack set to 9v or 12v?

 

The included charger's output is listed as 8.4v so it seems like 9v should do it. But....

 

I have a mobile battery pack (XTPower MP-10000) that can output both 9v and 12v, and when it's set to 9v it successfully powers the camera while it's on, but it doesn't charge the LP-E6N while the camera is off.

 

So I'm wondering if something funky is going on, such as the voltage needed to power the camera is 9v but the volted needed to charge the LP-E6N inside the camera is 12v?  The last thing I want to do is set it to 12v and fry my new gadget.

Highlighted
Product Expert
Product Expert
Posts: 514
Registered: ‎10-17-2012

Re: XC10: Charging via a 9v or 12v mobile battery pack

Hello rjophoto, 

We have not tested charging the LP-E6N inside the XC10 with a mobile battery pack.  Since this is not tested or something ascribed in the manual we're not able to officially recommend attempting this.    

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement