05-08-2018 05:11 AM
Hi.
Currently testing with a C200 here, but is there a way to get a standard HDSDI SMPTE 292M signal from SDI from these cameras? Or is the C200 specific in not allowing that?
Any help apeciated.
Gunleik
Solved! Go to Solution.
05-09-2018 06:06 PM
Hello gunleik,
The HD-SDI output from the EOS C200 will do SMPTE 292 and SMPTE ST 299-1. There is no mention in the manual about SMPTE 292M, if this is different than SMPTE 292, it may explain the disparity.
05-09-2018 06:06 PM
Hello gunleik,
The HD-SDI output from the EOS C200 will do SMPTE 292 and SMPTE ST 299-1. There is no mention in the manual about SMPTE 292M, if this is different than SMPTE 292, it may explain the disparity.
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.