11-19-2017 12:10 PM
I am just wonder how I should mount Canon 100-44mm f4.5-5.6 lens on Canon C100 Mk 2 as it's a heavy lens. I do have a lens support on a 15mm rails but it's hard to position it without it interfereing with zoom berrel.
I don't want to leave the lens hanging from my C100 as it could damage the mount. If I mount the camera on the lens then it might put too much weight on the lens and the throat of the camera.
Thanks.
11-20-2017 06:03 PM
Hello meghdoot76,
Typically when mounting a heavy lens like this on an EOS Cinema camera you would use like a cage and rails like the Red Rock Micro rig. This ensures the weight is properly distributed.
11-27-2017 05:32 AM
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.